Magic Spin Mop Steel

How to use the Spin Mop?

The overall operation of the mop is very easy:

1. In the first step, you have to connect the two pieces of cleaning rod in the correct manner
2. In the second step, you have to simply put the microfiber heads on the floor and make sure that all the microfibers are spread out over the cleaning surface
3. Now, place the cleaning head on the microfiber head and press the cleaning head with your foot until you hear clicking sound. This sound indicates that the cleaning head has been firmly attached to the microfiber head.
4. For the very time, you should be cleaning the surface with the cleaning head at an angle of 45 degrees, because if you don’t follow this angle than it can affect the cleaning process
5. You can also get to the 360 degrees swivel at the same angle to clean in and around the surfaces
6. You can also clean the surface beneath the under table and under couches at an angle of 180 degrees
7. Swipe the microfiber head over the dry floor surface to produce electrostatic charge in it. This charge will help to attract dust and dirt particles with it
8. Now fill the bucket with lukewarm water at half level and adds the mild cleaning detergent in it
9. Now thoroughly mix the water to ensure uniform mixing of the cleaning agent
10. In the next step, dip the microfiber head into the solution and then place the dipped head into the rotatable swivel
11. In order to rotate the swivel, you have to place the microfiber head in the rotating assembly
12. Now, you have to push the connecting rod in the assembly to start the 360˚ rotatable swinging motion
13. Lift the rod in the backward direction to stop the swinging motion
14. Now repeat this process until all the loose liquid wipes out from the mop head
15. Now your magic mop s ready for cleaning, you can wipe the mop on almost any surface you want to clean
16. You can also press your foot gently over the microfiber mop to wipe out the tough stains over any surface
17. You can easily detach the cleaning head from the microfiber mop by just slightly placing your foot on the expanded microfibers and push the connecting rod slightly upward.
18. Now, the connecting rod should be detached from the microfibers mopping head
19. You are done